The ESP8266 CH340 NodeMcu V3 Lua WiFi Module is a development board based on the ESP8266 WiFi-enabled microcontroller. This particular version uses the CH340 USB-to-UART converter, making it easier to program via a standard USB interface. It is popular among hobbyists and developers for building IoT (Internet of Things) applications, home automation systems, and much more. Key Features: Microcontroller: ESP8266 (ESP-12E/F module) WiFi Support: 802.11 b/g/n USB to UART: CH340 Operating Voltage: 3.3V (with 5V tolerant I/O) Digital I/O Pins: 17 Analog Input Pin: 1 (ADC0) Flash Memory: Usually 4MB Clock Speed: 80MHz (can be overclocked to 160MHz) Programming: Can be programmed using Arduino IDE, NodeMCU firmware, or other compatible programming environments. Integrated Antenna: Onboard PCB antenna for better reception. NodeMCU's native Lua interpreter Arduino IDE (with ESP8266 package installed) PlatformIO Micropython (though less common) Usage: Programming this board is quite similar to programming an Arduino. You can connect it to your computer using a micro USB cable. Once the required drivers are installed (CH340 drivers), you can select the correct COM port and board type in your programming environment and upload your code. Applications: Home automation IoT projects Smart Lighting Sensor networks Web servers Limitations: Limited number of analog pins (only one). Lower operating voltage (3.3V), but it does include a voltage regulator for some flexibility. May require external power for energy-hungry peripherals. Safety Note: Always be cautious with the voltage levels when interfacing with other modules or components. The I/O pins are typically 5V tolerant but supplying a voltage higher than 3.3V to the VCC may damage the board. Overall, the ESP8266 CH340 NodeMcu V3 Lua WiFi Module provides a very cost-effective way to build WiFi-enabled projects and is supported by a large online community.
